The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studies

Grudinsky, P.; Yurtaeva, A.; Pankratov, D.; Pasechnik, L.; Musaelyan, R.; Dyubanov, V.

Авторы: Grudinsky Pavel, Yurtaeva Anfisa, Pankratov Denis, Pasechnik Liliya, Musaelyan Roman, Dyubanov Valery
Журнал: Materials
Том: 17
Номер: 10
Год издания: 2024
Издательство: MDPI
Местоположение издательства: Basel, Switzerland
Первая страница: 1
Последняя страница: 22
Номер статьи: 2224
DOI: 10.3390/ma17102224
Аннотация: The Waelz slag generated during electric arc furnace dust processing is an iron-rich product with significant amounts of iron, zinc and copper. About 600–800 kg of the Waelz slag is generated per ton of the dust processed. The Waelz slag samples from two different plants were thoroughly characterized using inductively coupled plasma optical emission spectroscopy (ICP-AES), X-ray diffraction analysis (XRD), chemical phase analysis, Mössbauer spectroscopy and other supporting methods. The phase distribution of iron, zinc and copper was determined in the Waelz slag samples. Low-intensity wet magnetic separation was tested for the iron recovery from the Waelz slag samples. It was found that the Waelz slag samples have complex chemical and mineralogical compositions, which can impede the selective recovery of valuable elements. The obtained results indicate that the chemical and mineralogical composition of the Waelz slag samples has a considerable effect on the magnetic separation indexes. The experiments showed that the iron concentrates with Fe contents of 73% and 46.8% with the metallization degrees of 87.2% and 57.5% and the iron recovery degree of 54.8% and 52.9% were obtained at optimal conditions for two different samples, respectively, without selective segregation of Cu and Zn in the magnetic or non-magnetic fraction.
Добавил в систему: Панкратов Денис Александрович

	ИСТИНА	Войти в систему Регистрация
	ИСТИНА ИНХС РАН
	Главная Поиск Статистика О проекте Помощь

ИСТИНА

ИСТИНА ИНХС РАН

The Waelz Slag from Electric Arc Furnace Dust Processing: Characterization and Magnetic Separation Studiesстатья Исследовательская статья

Прикрепленные файлы