|
ИСТИНА |
Войти в систему Регистрация |
ИСТИНА ИНХС РАН |
||
Finline-integrated cold electron bolometerстатья
- Авторы: Otto Ernst, Tarasov Mikhail, Grimes Paul K., Kaurova Natalia S., Kuusisto Hannes, Kuzmin Leonid S., Yassin Ghassan
- Сборник: MILLIMETER, SUBMILLIMETER, AND FAR-INFRARED DETECTORS AND INSTRUMENTATION FOR ASTRONOMY V
- Серия: Proceedings of SPIE
- Том: 7741
- Год издания: 2010
- Место издания: SPIE
- DOI: 10.1117/12.858263
- Аннотация: The Cold-Electron Bolometer (CEB) is a sensitive millimetre-wave detector which is easy to integrate with superconducting planar circuits. CEB detectors have other important features such as high saturation power and very fast response. We have fabricated and tested CEB detectors integrated across the slot of a unilateral finline on a silicon substrate. Bolometers were fabricated using two fabrication methods: e-beam direct-write trilayer technology and an advanced shadow mask evaporation technique. The CEB performance was tested in a He-3 sorption cryostat at a bath temperature of 280mK. DC I-V curves and temperature responses were measured in a current bias mode, and preliminary measurements of the optical response were made using an IMPATT diode operating at 110GHz. These tests were conducted by coupling power directly into the finline chip, without the use of waveguide or feedhorns. For the devices fabricated in standard direct-write technology, the bolometer dark electrical noise equivalent power is estimated to be about 5x10-(16W)/root Hz, while the dark NEP value for the shadow mask evaporation technique devices is estimated to be as low as 3x10(-17)W/root Hz.
- Добавил в систему: Кузьмин Леонид Сергеевич